XANDEM HARDWARE

THE GATEWAY

The Gateway receives wireless transmissions from the nodes. It is the key point of integration and can be connected
to other systems via IP (Ethernet), hardware relays, and/or software APIs.

Input voltage: 5 volts DC barrel connector or 12 volt* wire terminals

Current: 500mA (typical), 2A (max)

Relays: 4 normally-closed (programmable via the rules engine)

Power connector: 5V wall adapter or wire terminals*

RF transmit power: 4.5dBm

RF center frequency: 2.403-2.480 GHz

RF bandwidth per channel: 5 MHz

Physical dimensions: 3.7 x 3.7 x 1.4 inches

Network connector: Ethernet (RJ45)

Audio connector: 1/8" stereo

Real-Time Clock: Yes*

SD Card slot: Yes*

LEDs: 1 RGB LED

Buttons: 2 external

*PRO version only
 


PLUG-IN NODES

The Plug-In nodes are ideal for fast retrofit installations in places where AC outlets are available.

Input voltage: 120-250 volts AC

Current: 50mA (typical)

Power connector: USA wall prongs

RF transmit power: 4.5dBm

RF center frequency: 2.403-2.480 GHz

RF bandwidth per channel: 5 MHz

Physical dimensions: 1.5 x 2.5 x 1.0 inches

LEDs: 1 RGB LED

Buttons: 1 external

Power backup: 220mAh lipo battery*

*PRO version only


WIRED NODES

Wired nodes are ideal for permanent installations where AC outlets are unavailable, or when hiding/embedding the nodes is required.

Input voltage: 3-12 volts DC

Current: 50mA with LEDs enabled, 35mA LEDs disabled

Power connector: screw-less wire terminals size 20-26 AWG

RF transmit power: 4.5dBm

RF center frequency: 2.403-2.480 GHz

RF bandwidth per channel: 5 MHz

Physical dimensions: 1.5 x 3.0 x 0.6 inches

LEDs: 5 status LEDs

Buttons: 2 internal